Search

Communications engineering

Industrial telephone, ex industrial telephone, ex Headset for dA24, telephone connection relays, telephone cabins, protective telephone casing

Saftey engineering

Manual fire alarm, flashing warning lamp, emergency switch with glass panel, holding solenoid, lighted panel

Mining

Switch and button, gateway lamp, built in LEDs, pressure switch

Products - Communications engineering

Industrial telephone [Type A24]

The weatherproof A24 is suited for dusty and moist environments. It is designed for DTMF and pulse dialling as well as a PABX device and end device. Its keypad consists of 16 durable buttons that can also optionally ordered to light up. A continuously adjustable fixture protects the telephone handset against shocks. An integrated volume amplifier can be added on. We are also happy to offer the A24 with two custom buttons that can be assigned other functions as desired.

Ex industrial telephone [Type dA24 + dA24/ZB]

The lightweight Ex industrial dA24 telephone is designed for areas at risk of explosion. It can be used as a PABX device and end device as well as for DTMF or pulse dialling. In the event of loud environmental noise, you have the option of turning on an integrated handset amplifier. A continuously adjustable fixture protects the telephone handset against shocks. The robust 16-part keypad can also be ordered with lighted keys. Upon request, we can also deliver the dA24 with two custom keys whose functions you can assign.
The keyless version dA24/ZB is also suitable as an alarm phone.

Custom telephones [Type A24ZB/AL-Basic]

The weatherproof A24ZB/AL-Basic can be connected to any standard elecommunications equipment. Using the internal programming keyboard, the A24ZB/AL-Basic can be converted into an alarm telephone: The programmed phone number is automatically dialled as soon as the handset is picked up.

Custom telephones [Type A24OB/A24OBL]

The A24OB is used to configure autonomous telephone lines - up to ten separate ones can be connected to one another using the A24OBL. The integrated energy saver mode greatly increases the service life of the battery.

Headset [Type WHA]

Even in the midst of high noise levels of up to 115 dB (A), the WHA allows you to conduct absolutely comprehensible conversations, since the dynamic microphone compensates for external static noise. Given its robust construction, the WHA is particularly well suited for industrial use. It is designed for extreme conditions in terms of heat, cold and moisture - such as within a deep-freeze facility or ship machine rooms.

Ex Headset for dA24 [Type iHS]

The iHS headset will keep you in safe contact even in potentially explosive environments. Thanks to the headset's excellent insulation efficiency, you can conduct problem-free conversations even in environments with very high noise levels of up to 115 dB (A). The dynamic microphone perfectly compensates for disruptive external noises. The iHS perfectly complements the dA24 industrial telephone and is suitable for use on offshore platforms and other explosive environments.

Telephone jack [Type wTSD]

The wTSD was developed for surface mounting. Its casing is made of Macrolon and is equipped with a screw-on protective cap. Various communicationsdevices can be connected into the tip jack, such as our A24. The wTS plug possesses a seal ring.

Telephone second receiver [Type iZH2]

The iZH2 is very small and sits particularly well in the hand. As an intrinsically safe device, it creates no inflammable sparks and can hence be used in explosive environments. The iZH2 comes equipped with a spiral cable and is permissible for the A24 and dA24 telephones.

Phone signal [Type DUO]

The DUO signals incoming calls both audibly and optically: it lights up with roughly five watts per second and emits a two-tone signal at 105 db (A)/1 m. The flash frequency and the signal tone can be set individually. Breaks in the ringing current are bridgeable. The DUO is intended for wall mounting and is controlled by the integrated telephone connecting relay. Other connecting types are possible, such as via a doorbell.

Telephon second ringer [Type TW2]

The TW2 is built into a shock-proof plastic casing based on protection standard IP 66. The intermittent alarm has a maximum volume of 93 dB (A)/1 m. Because this is significantly different from running machines and motors, it can be perceived even in a loud environment

Telephone connection relay [Type TA3]

The TA3 telephone connection relays can be used to switch up to two external devices separately with ring tone signals - such as a siren and a flashing light. The bridging of the calling pause can be set for each of the attached devices. The TA3 are designed for permanent use and are suitable in their weatherproof forms for temperatures between -20 °C and +60 °C.

Ex telephone connection relay [dTA3]

The dTA3 telephone connection relays can be used to switch up to two external devices separately with ring tone signals - such as a siren and a flashing light. The bridging of the calling pause can be set for each of the attached devices. Both the dTA3 are designed for permanent use and are suitable in their Ex variation forms for temperatures between -20 °C and +40 °C.

Telephone cabins [Typ TK10]

The sound-absorbing TK10 telephone cabins put you in a position to hold clear conversations even in loud environments. Their shape and special sound-absorbing material offer ideal noise control. The telephone cabins are made of stainless steel or steel plates and are appropriate for wall mounting - but can also be mounted onto a base. Both industrial variations are coated with a high-grade elastic plastic.

Telephone cabins [TK75]

The sound-absorbing TK75 telephone cabins put you in a position to hold clear conversations even in loud environments. Their shape and special sound-absorbing material offer ideal noise control. The telephone cabins are made of stainless steel or steel plates and are appropriate for wall mounting - but can also be mounted onto a base. Both industrial variations are coated with a high-grade elastic plastic.

Protective telephone casing [Typ TGS1]

These sturdy protective telephone cases are made of stainless steel or steel plating. They are suitable for wall mounting, but can also be mounted onto pedestals. The TSG1 and TSH1 variants offer the user extra protection through side pieces and a protective roof. All types are coated with high-grade elastic plastic.

Do you need a casing in another size, colour or with a custom lock?
Just ask us!

Protective telephone casing [Typ TG1]

These sturdy protective telephone cases are made of stainless steel or steel plating. They are suitable for wall mounting, but can also be mounted onto pedestals. The TSG1 and TSH1 variants offer the user extra protection through side pieces and a protective roof. All types are coated with high-grade elastic plastic.

Do you need a casing in another size, colour or with a custom lock?
Just ask us!

Protective telephone casing [Typ TSG1]

These sturdy protective telephone cases are made of stainless steel or steel plating. They are suitable for wall mounting, but can also be mounted onto pedestals. The TSG1 and TSH1 variants offer the user extra protection through side pieces and a protective roof. All types are coated with high-grade elastic plastic.

Do you need a casing in another size, colour or with a custom lock?
Just ask us!

Protective telephone casing [Typ TSH1]

These sturdy protective telephone cases are made of stainless steel or steel plating. They are suitable for wall mounting, but can also be mounted onto pedestals. The TSG1 and TSH1 variants offer the user extra protection through side pieces and a protective roof. All types are coated with high-grade elastic plastic.

Do you need a casing in another size, colour or with a custom lock?
Just ask

back to previous page